Rx-D User Guide 2.0 Fit Battery

Rx-D User Guide 2.0 Fit Battery

1. Begin by using the provided screwdriver to remove the two screws securing the battery door.
2. Carefully lift and pull down the battery door to open it.
3. Avoid looking directly at the LEDs and ensure the speaker volume is not set to the maximum before switching on the device.
4. It’s crucial to use a high-quality 9-volt battery, such as a juror self pp3, and avoid using a rechargeable battery.
5. Once you have the appropriate battery, connect it to the Rx-D.
6. Replace the battery door and securely screw it back into place.
7. When the battery is connected for the first time, the Rx-D will automatically switch on, and the purple LED will flash continuously. This signifies that the device is in single channel pairing mode.
8. If the Rx-D remains unpaired, it will automatically switch off after 45 seconds.
9. To use the Rx-D, it must be paired with your Txi-Ds.

Following these steps will allow you to properly fit the battery to the Rx-D and ensure correct operation.


Related Pages


Our product range

Our bite alarms are world famous and unsurpassed for controlled sensitivity, micro adjustment and, above all, reliable bite indication. With the release of the fully digital Txi-D and Rx-D we have now made the best even better

Download our App

For all the latest info, user guides, easy access to Spares, Repairs and Returns and more…

Be Social

View latest Video

Newsletter Sign Up

Delkim Ltd, P.O. Box 270, Bedford, England, MK43 7DZ   Tel +44 (0) 1234 721116

Terms & Conditions | Privacy Policy

Website created by beach.