#Delkimfamily

Rx-D User Guide 4.3 Multi-Channel Pairing

Rx-D User Guide 4.3 Multi-Channel Pairing

To initiate the pairing process between the Rx-D and Txi-D, follow these steps:

1. Ensure all devices are switched off, and response and volume levels are set to a low level.
2. Place the receiver within a meter of the Txi-D while in pairing mode.
3. If there’s no activity for 45 seconds, the receiver will automatically switch itself off and cancel any pairing changes.
4. In case a mistake is made during pairing, either wait for 45 seconds for it to timeout and switch off, or manually switch off the receiver to cancel the pairing and start the process again.
5. To enter multi-channel pairing mode, turn on the receiver and hold down the button until it enters this mode.
6. Turn on the alarms one by one as requested by the receiver during multi-channel pairing mode.
7. Once all alarms are paired into the receiver, press the push button to skip over the LED channels that won’t be used, and this confirms the pairing completion.
8. For multi-channel pairing, each Txi-D is differentiated by one to four LED flashes on the program channel of the Rx-D.
9. Any colour alarm can be paired to any colour LED on the receiver, offering total flexibility in the colour alarms used. The LED colours do not need to match.

By following these steps, you can successfully pair the Rx-D and Txi-D alarms, allowing for effective and customisable use of the devices.

Related Pages

e-newsletter


Our product range

Our bite alarms are world famous and unsurpassed for controlled sensitivity, micro adjustment and, above all, reliable bite indication. With the release of the fully digital Txi-D and Rx-D we have now made the best even better

Download our App

For all the latest info, user guides, easy access to Spares, Repairs and Returns and more…

Be Social

View latest Video

Newsletter Sign Up

Delkim Ltd, P.O. Box 270, Bedford, England, MK43 7DZ   Tel +44 (0) 1234 721116

Terms & Conditions | Privacy Policy


Website created by beach.